{"product_id":"bambu-lab-x2d-3d-printer","title":"Bambu Lab X2D 3D Printer","description":"\u003ch2\u003e\u003cstrong\u003eDual-Nozzle Printing, Built for a Cleaner Workflow\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBambu Lab X2D\u003c\/strong\u003e is the next-generation flagship of Bambu Lab's X Series: an enclosed, dual-nozzle 3D printer designed to cut post-processing and material waste. One nozzle prints your model while the second handles support material, so supports peel away cleanly and multi-colour prints need far less purging. Choose the standalone \u003cstrong\u003eX2D\u003c\/strong\u003e, or the \u003cstrong\u003eX2D Combo\u003c\/strong\u003e with an AMS 2 Pro for multi-colour and multi-material printing.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTwo Nozzles, Less Waste\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe X2D switches between its two nozzles mechanically, using a gear and trigger mechanism instead of an extra motor on the toolhead, which keeps the toolhead light for stable motion. The mechanism has been life-tested beyond one million switches. Use a dedicated support material for clean removal, and switch nozzles instead of purging filament to save time and material in multi-colour prints.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eHybrid Extrusion with Real-Time Calibration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe main nozzle uses a direct drive extruder for precise filament control, while the auxiliary nozzle is fed by a rear-mounted Bowden extruder. A PMSM servo motor samples torque and position at 20 kHz to catch feeding problems early, and Dynamic Flow Calibration runs automatically before each print to compensate for nozzle wear and filament changes.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eEngineering Materials, Enclosed\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWith a nozzle temperature up to \u003cstrong\u003e300°C\u003c\/strong\u003e and an actively heated chamber up to \u003cstrong\u003e65°C\u003c\/strong\u003e, the X2D handles ABS, ASA and nylon with less warping and stronger layer adhesion. A cooling mode circulates fresh air for better overhangs and bridging with PLA. Three-stage filtration (G3 pre-filter, H12 HEPA and activated carbon) keeps the air cleaner.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eAMS 2 Pro Multi-Colour Printing\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe X2D Combo includes the AMS 2 Pro for automatic multi-colour and multi-material printing, with built-in filament drying to keep your spools in good condition.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSmart, Quiet and Reliable\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e31 sensors monitor filament feeding, temperatures and safety, and an optional vision encoder brings motion accuracy to around 50 µm. Noise stays below 50 dB. Available in Kenya from 3D Moguls.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e256 × 256 × 260 mm³ Build Volume (single nozzle, main nozzle)\u003c\/li\u003e\n\u003cli\u003e235.5 × 256 × 256 mm³ Build Volume with Both Nozzles\u003c\/li\u003e\n\u003cli\u003eDual-nozzle with Mechanical Switching\u003c\/li\u003e\n\u003cli\u003eDirect Drive (Main) + Bowden (Auxiliary) Extruders\u003c\/li\u003e\n\u003cli\u003e300°C Nozzle \u0026amp; 65°C Active Chamber Heating\u003c\/li\u003e\n\u003cli\u003eHeatbed up to 120°C\u003c\/li\u003e\n\u003cli\u003e0.4mm Hardened Steel Nozzle Included\u003c\/li\u003e\n\u003cli\u003e3-stage Air Filtration (G3 + H12 HEPA + Activated Carbon)\u003c\/li\u003e\n\u003cli\u003e31 Sensors for Feeding, Thermal and Safety Monitoring\u003c\/li\u003e\n\u003cli\u003eDimensions: 392 × 406 × 478 mm, Weight 16.25 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat's in the Box\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab X2D 3D Printer\u003c\/li\u003e\n\u003cli\u003eTextured PEI Build Plate\u003c\/li\u003e\n\u003cli\u003eExternal Exhaust Fan Set\u003c\/li\u003e\n\u003cli\u003eAccessory Box\u003c\/li\u003e\n\u003cli\u003eSpool Holder\u003c\/li\u003e\n\u003cli\u003eAMS 2 Pro (X2D Combo only)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bambu Lab","offers":[{"title":"X2D Combo","offer_id":68065372143889,"sku":null,"price":225000.0,"currency_code":"KES","in_stock":true},{"title":"X2D","offer_id":68065372176657,"sku":null,"price":195000.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/7624\/8337\/files\/image-5.png?v=1794752546","url":"https:\/\/3dmoguls.com\/products\/bambu-lab-x2d-3d-printer","provider":"3D Moguls","version":"1.0","type":"link"}